NJP1200 Model with high Filling Percentage, Less Deviation ,few dusting ,easy to change mould、Low noise and etc. All important parts are international famous Brand . We will supply CE Certification and FDA IQ 、OQ 、PQ Documentation .
Technical Date
Model |
NJP500 |
NJP800 |
NJP1200 |
Output |
30000 |
48000 |
72000 |
No. of die orifice |
4 |
6 |
9 |
Filling percentage |
≥ 99% |
≥ 99% |
≥ 99% |
Power (kw) |
380V.50Hz |
380V.50Hz |
380V.50Hz |
Vacuum |
27m3/h |
27m3/h |
52m3/h |
Machine dimensions |
1350*1020*1850 |
1350*1020*1850 |
1350*1020*1850 |
Weight (kg) |
850Kg |
850Kg |
850Kg |
Noise emission |
< 73dB(A) |
< 73dB(A) |
< 73dB(A) |
Remark : If Filling 000# Mould , The capacity of NJP1200 is 660 capsule per min . |
Main Function
High Filling Percentage
Two Structures for Supporting:
New design Vacuum sucker structure ,there are vacuum sucker which sucked the Lower modules holes tightly to avoid leakage air for more seperating performance.
Module cleaning Station:
Needle Type Blowing cleaning structure which for cleaning some sticky powder inside of the module holes . It is cleaning thoroughly for seperating station much better.
The Weight variation can be controlled within ±3% at normal situation
Following Points for Supporting
Precious Filling Structure
Adjusting the Pressure by the Screws
Working Area Less Dusting
Following Points for supporting
With Dust Collecting Device which used for collecting the strewning around powder .
Five Point levelling mechanism , with collector box which used for recycle the powder to used again
Low Noise , Running Stable.
Following Points for Supporting
Reasonable Design Greatly Increase the stability .
Precious gear drive , High indexing accuracy High Speed ,stable Running , low Noise