SHOW
|
Model |
GZPTS-45 |
GZPTS-55 |
GZPTS-75 |
|
Punch& Die Type (EU) |
D |
B |
BB |
|
Number of Station |
45 |
55 |
75 |
|
Max Tablet Diameter (m) |
25 |
16 |
13 |
|
Max Oval Size (mm) |
25 |
18 |
16 |
|
Max output (Tablet/Hour) |
432000 |
528000 |
720000 |
|
Max Filling Depth (mm) |
20 |
18 |
18 |
|
Main Main Pressure (KN) |
100 |
100 |
100 |
|
Max Pre-Pressure (KN) |
20 |
20 |
20 |
|
Idle Load noise dB(A) |
<85 |
||
|
Power |
380v50HZ 15KW |
||
|
Size L*W*H (mm) |
1265×1485×1950 |
||
|
Weight (Kg) |
3750 |
||
Advanced Introduction
A 、With Weight Automatic Control Functions ,Rejection in Batch and Rejection in single .Normally , The weight tolerance can control within ±2%
The performances are realized by the following structures and functions
①、Adopt Precision screw incline jacking mechanism ,High Precious of the control filling guide ,some other factory’s adopt worm and gear structure which big gap and with backhaul ,weight variation.
②、 Long length Quantitative guide which can control 7-11 punches ,Quantitative more accuracy and less weight variation
③、Three Layers three impeller force feeding system
④、Punches runs stable and less weight variation by Magneto damping Pin in lower punch position .
B 、Less material loss ≤0.5％（ more than ≥1% in other similar equipment
The performances are realized by the following structures and functions
①、With Two stage drive system ,Main shaft will not rotary , the punches plate combination rotary around a fixed main shaft .the punches plate runs more stable with less jump .
Double block design solve the leakage problem less material can controlled within 0.5%.
