The milling chamber can be dismantled via a tri-clamp;
The safety switch does not have cable outside;
The half round screen has as high as 40% active opening;
Easy to clean, no outside cable;
Easy assembly;
Easy access of operation;
The smallest milling size is 30um.
Product feature
Bigger active sieve surface lead to higher throughput and low temperature rise.
The good design reduce the number of the moving parts. The connection of the tri-clamps assure an easy way to assemble and dismantle the milling chamber which assure the offline sterilization;
This means: Quick and easy cleaning and maintenance and high operational availability at lower operating costs.
All tri-clamp assembled feeding device;
AT rotating cylinder;
The high speed rotor with both knife and hammer side;
The rotor and the sieve do not have mechanical contact;
High active opening sieve;
The milling head can be easily dismantled.
Technical specification
Execution |
Parts in contact with products |
Parts not in contact with products |
l |
Stainless steel 316/316L |
Stainless steel 304 |
Seals |
FDA compliant plastic(EPDM/PTFE) |
Various plastics |
Surfaces |
Ra<0.4, polished |
Ra<0.8, polished |
Weld seams |
Ground and polished |
Brushed and treated |
Rotor |
Depending on products, rotor side and hammer side can be chosen |
|
Screen |
Square opening, size from 0.1mm to 10mm |
|
Distance of screen and rotor |
No mechanical contact |
Applied scope:Medicine, food and chemical industry