SHOW
Product introduce
The milling chamber can be dismantled via a tri-clamp;
The safety switch does not have cable outside;
The half round screen has as high as 40% active opening;
Easy to clean, no outside cable;
Easy assembly;
Easy access of operation;
The smallest milling size is 30um.
Product feature
Highest speed can reach 18000 rpm；
Minimum particle size can be 30um；
Suitable for batch 5g-50kg；
Support CIP/SIP
All tri-clamp assembled feeding device;
AT rotating cylinder;
The high speed rotor with both knife and hammer side;
The rotor and the sieve do not have mechanical contact;
High active opening sieve;
The milling head can be easily dismantled.
Technical specification
|
Execution |
Parts in contact with products |
Parts not in contact with products |
|
|
Stainless steel 316/316L |
Stainless steel 304 |
|
Seals |
FDA compliant plastic(EPDM/PTFE) |
Various plastics |
|
Surfaces |
Ra<0.4, polished |
Ra<0.8, polished |
|
Weld seams |
Ground and polished |
Brushed and treated |
|
Rotor |
Depending on products, rotor side and hammer side can be chosen |
|
|
Screen |
Square opening, size from 0.1mm to 10mm |
|
|
Distance of screen and rotor |
No mechanical contact |
|
Applied scope：Medicine, food and chemical industry
