SHOW
Product introduce
The milling head of PM series contains a static plate and a rotating plate and a feeding valve. The product goes to the milling chamber via feeding valve and will go through spaces of pins between the static and the rotating plate and be impacted to fine particles during this process.
Product feature
Highest speed can reach 18000 rpm；
Minimum particle size can be 30um；
Suitable for batch 5g-50kg；
Support CIP/SIP
All tri-clamp assembled feeding device;
AT rotating cylinder;
The high speed rotor with both knife and hammer side;
The rotor and the sieve do not have mechanical contact;
High active opening sieve;
The milling head can be easily dismantled.
Technical specification
|
Execution |
Parts in contact with products |
Parts not in contact with products |
|
|
Stainless steel 316/316L |
Stainless steel 304 |
|
Seals |
FDA compliant plastic(EPDM/PTFE) |
Various plastics |
|
Surfaces |
Ra<0.4, polished |
Ra<0.8, polished |
|
Weld seams |
Ground and polished |
Brushed and treated |
Applied scope: medicine,chemical fertilizer
