SHOW
Patent
1、Equipped with discharger which can discharge the hot air and harmful gases outside.
(patent no.:201020687711.8)
Discharge the unnecessary hot air outside through the hot air processing unit.
Avoiding the 600degree Celsius hot air contact with the material(ointment).Avoiding the material go bad in short time.Avoiding the oil gas and the moisture which is produced when hot air contact with material caused the wrong sealing .
Discharge the harmful gases outside the room which is produced when heating the plastic and laminated tube .
2、Have the patent certificate in design
(patent no.：201530326579.6)
3、Have the patent certificate in multifunction filling for different material tube
(patent no.: 201420524757.6)
No need to change the whole set mechanical hand
The changing operate from plastic tube to aluminium tube is very easy .
Features
Have got CE certification
Stable production
Meet all GMP requirement
Humanization design, lower the height of operation
Tube lifter with big capacity and lower height
Parameters
Adopt to the maximum tube diameter:
Metal tube: 10-35mm Plastic tube and laminated tube: 10-50mm
The volume range:
Metal tube: 1-150ml Plastic tube and laminated tube: 1-250ml
Steadily produce speed: 80pcs/min
Filling precision:≤+/-1%
The total power of machine : 7.0kw
Air pressure: 0.4-0.6 Mpa
Function
Inner-heating type
The tube is automatically pressed into the tube holder.
The elastic tension type tube holder is adoped to guarantee the consistent sealing height.
The automatic color mark adjusting systems is adopted for oval tubes or other special-shaped tubes.
Adopt mechanical transmission mode filling system ensuring the stability of loading capacity.
Original Swiss LEISTER heater is adopted .
The internal wall of tube adopts hot air sealing and the external wall of tube adopts cooling water circulative cooling,which can beautiful sealing effect.
Automatically discharge the poisonous gas produced during the heating outside the room.
After the sealing, the wind cooling system is adopted to prevent the heat from being conducted to the ointment.
PLC automatic control system.
Highly clear stainless steel frame.
The connection of emulsifier 、cartoning machine and filling machine can be easily achieved.
It is easy to operate between different sizes of tubes.
Automatic completion of filling 、sealing and batch No. printing in one machine.
Provided such functions as automatic supply of a tube to a worktable of machine、automatic tube blowing(cleaning)、tube color mark automatic adjustment in a holder and automatic filling and sealing.
Speed shall be adjustable by inverter.
The production capacity can be realized and control automatically.
Human-machine interface with direct display and control.
Tube feeding、absorbing and locating device.
Automatic detection of tube direction inversion., inversion detection phototube can accurately detect the inverted tube.
Cam indexing.
Automatic cleaning the inner tubes and the dust collecting system.
Provided with malfunction alarm, automatic stopping device when the door is opened and mechanical overload.
The combined material feeding forms of blow cutting and cutting can guarantee the filling of high viscosity.
No tube no fill.
Column style material temperature automatic control blending system.(optional).
Ultrasonic hopper level sensor. (optional)
USA BANNER ultrasonic level probe combined with Siemens module can be used to accurately control material level and give direct display on the touch screen
Material pump. (optional)
Water cooler(chiller). (optional)
