SJ-7LS automatic suppository filling production line_Suppository Production Line_Other Preparation Machinery_Preparation Equipment_sell

Home » Product » Preparation Equipment » Other Preparation Machinery » Suppository Production Line » SJ-7LS automatic suppository filling production line

SJ-7LS automatic suppository filling production line

Brand：Shanghai Yuanying
Payment term：30% in advance, 70% before delivery;
Exchange provision：FOB Shanghai
Unit Price：600000.00USD/Unit
Mini Order：1 unit
Supplier Quantity：
Delivery Time： 70 Days adter advance payment

Shanghai Yuanying Packaging Machinery Co., Ltd.: Verified; Contact Person Shanghai Yuanying Pa(Mr.); Tel; Address NO. 84, JINWEN ROAD, PUDONG DISTRICT SHANGHAI CHINA

Product presentation

1. Introduction of equipment performance
The SJ-7LS automatic suppository filling production line has a stable and efficient manufacturing process, filling, freezing, sealing and other production processes to complete the whole process, and the production capacity is 9,000-12,000 grain/hour.

1.1 Process flow
It will be rolled into the forming area by the clamping mechanism. The mold will be heated by the preheating mold, the mold, the mold, the blow mold and the bubble forming.

1.2 Filling
And one-time molding suppository for embedded type filling, filling accuracy + / - 2%, filling material barrel has electric heating insulation system, the top is equipped with a uniform mixing machine in order to make drugs, drug by high precision in VAT filling pump into the filling head, a drug through the other end of the cycle to rest after filling material barrel filling again next time.

1.3 Cooling design
The suppository of the whole drainage is entered into the cooling box, and the cooling box is equipped with a cold water unit.

1.4 Shearing
After being cooled, the solid suppository enters the sealing zone: preheating mold (preheating), sealing mould (seal), marking mould (batch number), The triangle knife will be cutting suppository top edge (cutting edge).，hob (top), counting shear.

Product feature
1. High Accuracy of Filling  (Patent technology）
The injection pump body is processed by special process, so that the sealing performance between the piston and the pump body is better, and the infusion volume is more accurate. The dosages can be fine-tuned.

2. Combination structure of triangle knife and dot line knife  (Patent technology）
Make the both of triangle and the dotted line knives completely coincide, make the bolted shell achieve the easy tear effect.

3. shearing system (Patent technology）
Instead of the tedious manual adjustment, the shear number can be completed by adjusting parameters of the touch screen, convenient operation, accurate positioning, stable operation and efficiency.

4 .Filling parts without sticking material on the pump  (Patent technology）
The equipment filling pump has high precision, good sealing effect, smooth inner wall and good stability, so as to achieve the long-term operation without hanging wall phenomenon.

5. Stirring tank speed adjusting system
Because of the different viscosity of the drug matrix, the mixing effect cannot be fixed and the drug can be mixed before the filling, which can affect the drug content of the finished product.

6. Continuous cooling system   (Patent technology）
The cooling system adopts the latest grading cooling technology, which can be cooled and solved the phenomenon of the edge of cooled material drops and fracture when the medicine is tearing apart.

7.PLC Examine system
The on-line monitoring function of PLC can be used to detect and alarm the fault self-check.

8.Filling parts equipped with anti-static system
Note: by filling parts molding shell before if not including the equipment because of trace drug when filling in the flowing area close to the bolt shell under the action of electrostatic force along the shell wall climbing a short level which could reach the sealing parts of the bolt, thus will affect the back of the sealing quality.

9. Filling parts without sticking material on the pump
The equipment has high precision and good stability, so it can run without wall for a long time.

10. Sealing and Shearing 3 degrees pre-heating
Be cooled solid suppository into the sealing area: the level of preheating mold (hot) to secondary preheating mold (hot), heat sealing moulds (sealing) - > code (lot number) - hob (clip) above - counting shearing.

11. Easy operation
Control station height reasonable design, machine operation is simple.

Function description

SJ-7LS Full-automatic Suppository Production Line is suitable for the production of special shape such as bullet head, torpedo shape and duck bill, to meet the production of your suppository. (according to the specifications of your specifications)
Equipment adopts PLC programmable control and man-machine interface operation, easy operation, convenient adjustment, accurate temperature control and smooth operation.

Temperature sensor and microcomputer control system are used to realize high precision thermostatic control.

The liquid storage tank is made of 316L stainless steel, with proper volume, heat preservation and heating function, and accurate temperature control; The tank is equipped with a mixing device to ensure the homogeneity of the liquid in the VAT at any time. The reservoir can be connected with the filling mechanism through the pipe, and the liquid can be kept in circulation to ensure the fluidity of the liquid and satisfy the demand of filling.

The insertion type linear perfusion mechanism can be used to locate accurate, not dropping, and not hanging wall; The single-grain measurement is 0.5-5ml and the filling error is plus or minus 2%.

Continuous cooling design, the post-infusion suppository shell can be fully cooled and the liquid solid transformation is realized.

Continuous strip, continuous sealing, sealing process batch number self-printing; The sealing seal should be well sealed.

Simple and reasonable design, convenient operation and maintenance.

Technical specification

Commodity	Automatic suppository filling production line	Model	SJ-7LS
Output	9,000—12,000 pcs/h	single dosage	0.5—5ml
Dosage allowed	＜±2%	Packaging Film	PVC\PE (thickness0.15-0.18mm)
Stirring tank capacity	70L	Air pressure	≥0.6Mpa
Air consumption/min	1.5m³/min	Water consumption/h	50kg (recycling)
Working voltage	3P/ 380V	total power	7.5KW
Adopt forming shapes	Bullet, torpedo and duck shapes and other shapes	Machine Weight	2000KG
Adapt Material	Synthetic fatty acid glycerol, glycerin gelatin, polyethylene glycol etc	Each distance of suppository	17.4mm
Overall dimensions	L5,302mm×W2，120mm×H1,809mm