working principle:
The unit utilizes the relative movement between the movable toothed disk and the fixed toothed disk to crush the materials through tooth impact, friction and material impact. The crushed materials automatically enter the collection bag under the action of rotating centrifugal force, and the dust is sucked The dust box is filtered and recovered by a cloth bag. The unit is designed according to the "GMP" standard and is all made of stainless steel. There is no dust during the production process, and it can improve the utilization rate of materials and reduce costs.
3. Maintenance and maintenance of the raw ground grinder: 1. Before each use, check whether the components are firm or not. 2. Change the screen and wash the grinder to avoid water rushing into the motor, electrical appliances and bearings, so as not to affect the service life, and keep the grinder clean and hygienic at all times. 3. In order to prolong the service life of the bearing, lubricating grease should be added in time, and 7019-1 lithium-based grease should be used for lubrication. 4. The whole machine is overhauled every six months. Note: Do not crush metal, especially strong and high-viscosity materials.
Specification model
|
WF-20B
|
WF-30B
|
WF-40B
|
WF-60B
|
Production capacity ( kg/h )
|
60-150
|
100-300
|
160-800
|
WF-60B
|
Spindle speed ( r/min )
|
4500
|
3800
|
3400
|
2800
|
Feed size ( mm )
|
≤ 6
|
≤ 6
|
≤ 6
|
≤ 6
|
Crushing fineness ( mesh )
|
60-120
|
60-120
|
60-120
|
60-120
|
Crushing motor ( KW )
|
4
|
5.5
|
11
|
twenty two
|
Dust collection motor ( kw )
|
0.75
|
0.75
|
1.5
|
3
|
Overall dimensions length * width * height
|
1100*600*1650
|
1200*600*1650
|
1350*700*1700
|
1750*1100*1950
|