CF series hammer mill
1. Purpose:
The CF hammer series crusher is compared with the traditional WF-30B. It overcomes the shortcomings of large dust, clean dead ends, and high temperature. The equipment takes the materials out of the pulverizer under the positive pressure air generated by itself, and the materials are recycled for the second time and the first-level dust removal and recycling. All materials are recycled, and the sealing adopts pneumatic seal, no dust loss. It is an ideal crushing equipment for the preparation workshop.
2. Working principle:
The material enters the crushing chamber, and is crushed by the impact, shear, friction and mutual impact between the high-speed rotating hammer and the fixed tooth plate. When the movable plate rotates at high speed, the crushing chamber forms a positive pressure air, which generates a strong air flow, so that the material stays in the main machine for a short time. The air flow blows the material in the crushing chamber out of the main machine through the screen and enters the first-level collecting bucket and separator. . The wind and materials are separated in the separator, the materials fall into the secondary receptacle, and the wind enters the dust removal chamber from the dust removal port. The plagiarized powder is filtered by the cloth bag and left in the cloth bag, and the wind is discharged from the air outlet.
Parameter model
|
CF-200
|
CF-350
|
CF-450
|
CF-650
|
Motor power ( kw )
|
2.2
|
7.5
|
11
|
twenty two
|
Spindle speed (revolution / min)
|
3500
|
3500
|
3500
|
3500
|
Crushing fineness (mesh)
|
20-2000
|
20-200
|
20-200
|
20-200
|
Output ( kg )
|
2-50
|
30-300
|
40-400
|
100-1000
|
Net weight of single machine ( kg )
|
75
|
450
|
560
|
1000
|
Overall dimensions of the host ( mm )
|
810*550*1100
|
2000*1200*2500
|
2300*1250*2500
|
2500*900*1650
|