Summary

Reactor is used in the process of hydrolysis, neutralization, crystallization, distillation and evaporation in pharmaceutical, chemical, food, light and other industries. It can use SS304, SS316L, Titanium, Hastelloy, PTFE lined and other materials to manufacture. Several mixing types are available, such as anchor, frame and oar, etc. Cycloidal pinwheel reducer, variable-speed reducer and others could be applied in the rotating mechanism. The sealing device can use machines; Sleeve, semi-tube and coil pipe structure can be used in heating and cooling. There are several heating modes, such as steam, electric heating, heat conduction oil, etc. In order to meet different requirements of acid-and alkali-proof, high temperature resistance, wear resistance, corrosion resistance and others under different working environments, reactors can be designed and manufactured based on clients’ requests.

Structural features

Reactor is composed of body, cover, agitator, heating jacket, supporting and driving devices, seal devices, and etc. and equipped with electric heating rods.

Considering clients’ different producing technology and operating conditions, usually mixing patterns are divided into anchor, propeller, turbo, push or frame. The support seat has two kinds, hanging or back supporting type. There are holes for oil in and out, venting, and temperature monitoring in the jacket. At the bottom of the kettle, there is a discharge hole.

Operating requirements

1.Materials of the reactor are heated by jacket.

2.The vent pipe installed in the upper part of the jacket should be unblocked.

3.Oil should be slowly heated, especially in the first warming period, you should pay attention to preventing oil and steam from blasting boiling.

4.If there are no materials (heat absorbing medium) in the reactor, don’t heat jacket for testing.

5.The heating speed and insulation status (on/off) can be adjusted by valves or temperature controller.

Technology Parameters